Pneumatic Fittings

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators

Bulkhead Union KQ2E The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively. Tube-to-tube fitting The special profile design of the seal provides positive sealing under pressure without reduced flow Release button allows tube to be removed easily without damage Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 to 40°C) Note Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated). Bulkhead Adapators

Bulkhead Union

Bulkhead union. Applicable Tubing O.D.: ø3.2, ø4, ø6, ø8, ø10, ø12, ø16, ø1/8, ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2. Same diameter tubing.

The SMC partition penetration push to connect fitting is compact and light in weight. Suitable for use with nylon and urethane Can be used for a wide range of pressures

The SMC partition penetration push to connect fitting is compact and light in weight. Suitable for use with nylon and urethane Can be used for a wide range of pressures

The SMC partition penetration push to connect fitting is compact and light in weight. Suitable for use with nylon and urethane Can be used for a wide range of pressures

The SMC partition penetration push to connect fitting is compact and light in weight. Suitable for use with nylon and urethane Can be used for a wide range of pressures

The SMC partition penetration push to connect fitting is compact and light in weight. Suitable for use with nylon and urethane Can be used for a wide range of pressures

Cross Fitting KQ2TW The KQ2TW cross fittings from SMC are quick and easy to install into your fittings. These KQ2TW cross fittings are also more compact in design which means that they can be used within a confined space. Cross fittings are designed to four-branch tubing lines. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Tube-to-Tube Fittings & Plugs Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance. Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Cross Fitting KQ2TW The KQ2TW cross fittings from SMC are quick and easy to install into your fittings. These KQ2TW cross fittings are also more compact in design which means that they can be used within a confined space. Cross fittings are designed to four-branch tubing lines. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply. Tube-to-Tube Fittings & Plugs Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance. Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

Cross Fitting KQ2TW The KQ2TW cross fittings from SMC are quick and easy to install into your fittings. These KQ2TW cross fittings are also more compact in design which means that they can be used within a confined space. Cross fittings are designed to four-branch tubing lines. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Tube-to-Tube Fittings & Plugs Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance. Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)