Pneumatic separators—also known as water separators—are essential pneumatic air preparation components that help eliminate moisture and mist from compressed air systems. They also serve a dual function by filtering out unwanted, and potentially harmful, contaminants such as dust and debris.
Why use pneumatic separators?
These devices play a critical role in maintaining the efficiency and reliability of pneumatic and compressed air systems. If moisture is not effectively removed, it can lead to condensation within pipes, tools, and instrumentation—causing wear, corrosion, and system malfunctions over time.
The presence of condensed water contributes to corrosion in both storage tanks and distribution lines. It can also lead to degradation of machinery and compromise the quality of end products. Additionally, moisture can strip away pre-applied lubricants on valves and actuators, shortening their service life. Overall, water buildup in pneumatic systems results in decreased productivity and increased maintenance requirements.
Key features and advantages of pneumatic separators
Some notable features and advantages of using pneumatic separators include:
Compact and lightweight construction for easy installation and repositioning
Automatic drainage system, offering hassle-free operation with minimal upkeep
Engineered to resist clogging for consistent performance
The SMC AMG series water separator is installed on the air pressure line to remove water drops from compressed air. Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a 99% water
Water removal rate 99%
Max operating pressure 1.0MPa
Fluororubber material
Medium air pressure
Drain guide
IN-OUT reversal direction
Degreasing wash
White Vaseline
The SMC Drain separator for vacuum is Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum. Even when the
The element can be replaced with a single touch
The SMC series AM mist separators has nominal filtration rating 0.1 μm or 0.3 μm and rated flow from 300 to 14500 l/min (ANR). Connection size 1/8 to 2.
Nominal filtration rating 0.3 μm
Rated flow from 300 to 12000 l/min (ANR)
Connection size 1/8 to 2
Filter element service indicator option
The SMC mist separator with regulator simplifies piping and installation. This combination controls the filtration to 0.3μm, for applications that require cleaner air than regular filtration, such as air blow off. As part of the family of modular air prep
Three body sizes 1/8, 3/8 and 1/2
Port size 1/8, 1/4, 3/8 and 1/2
Minimizes space and piping
The SMC water separator can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element that is exclusively used for removing water droplet
Max. operating pressure 1.0 Map
Glass fibre material
SMC in. –1 in. AMG Series
Minimum operating pressure 1.5 bar
Will remove 99.9% of water droplets from an airline system
Automatic drain
Element is resistant to clogging
Modular unit
The SMC legacy series AM mist separator can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 μm. Use this product as a pre-filter for compressed air for precision instruments or cle
Nominal filtration rating 0.3 μm
Rated flow from 300 to 12000 l/min (ANR)
Filter element service indicator option
The SMC AMG series water separator is installed on the air pressure line to remove water drops from compressed air. Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a 99% water
Water removal rate 99%
Max operating pressure 1.0MPa
Fluororubber material
Medium air pressure
Drain guide
IN-OUT reversal direction
Degreasing wash
White Vaseline
The SMC legacy series AM mist separator can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 μm. Use this product as a pre-filter for compressed air for precision instruments or cle
Particulate filtration
Modular connection capable AM150C - 550C
Optional element life indicator
The SMC AMG series water separator is installed on the air pressure line to remove water drops from compressed air. Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a 99% water
Water removal rate 99%
Max operating pressure 1.0MPa
Fluororubber material
Medium air pressure
Drain guide
IN-OUT reversal direction
Degreasing wash
White Vaseline
The SMC adsorbing super mist separator separates and adsorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oil-free equivalent air. It should be applied for filtration of compressed air requiring high
Filter replacement time can be judged visually
Rc, G, NPT threads
Modular Mist Separator AFM20 - AFM40
Modular mist separators from SMC are lightweight and easy to install, minimising the time spent on installation. The bowl guards in the AFM series are clear enabling users to view from any angle.
Lightweight
Interchangeable for mounting
Note
Transparent bowl is for body size 30 and over
Filters, Lubricators and Separators
High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar.